First at all , thanks for this fantastic app!
I have little problem with EU Smart Socket lumi.plug.mmeu01
I can see power in real life, but Energy never changes.
With this load (20Watt), it takes 50 hours before 1kWh is used.
at this screen TV in standby mode, normal itās 200-300w, but another one connected to the boiler with 1500w and same result.
OK, maybe @TedTolboom can answer what the problem can be.
Can you restart the app (settings > apps > Aqara > restart), wait for 10 minutes, then send an appās diagnostics log (settings > apps > Aqara > restart) mentioning your username
Then wait for 60 minutes and send a second diagnostics logs (mentioning your username)?
Thank you Ted for quick answer.
Two reports was done. Name Yahooeyu
First:
4ccafd21-a3f3-4534-9c08-213fca8ffb0c
Second :
78d51818-cb5b-4443-9ccf-70e83ec4ab61
Hi @TedTolboom
Just for letting you know, Iām testing the recently added TVOC sensor but for me it reports very rarely.
Iāve gave a demo unit to a guy whoās tested under zigbee to mqtt and his result was a lot different:
At the morning Iāve restarted the sensor. Reports more often, but far less times as it did under Zigbee 2 Mqtt.
Can you share a apps diagnostics report (settings > Aqara > send diagnostics report), mentioning your forum ID?
I have a few power sockets but the power usage (total) isnāt been updated in 8 months now. I can see the actual usage but not the total. Is there an solution for this. Tnx in advance
I actually also observed issues with TVOC - randomly, eg. 1x per week it gets completely silent and when I press the button, it gets reconnected and eg. ppb starting on 999ppbā¦then it settle down for another 2-3 days.
Iām not sure it will be still visible in the logs, now itās running fine for 2 days - 465ea80c-7d8a-4e8c-a498-94903ba01a26 - if there will be nothing, I will repost after āoutageā
Hi, does anyway know if the mi-boxer will be supported by homey?
Hi, Iām starting to have a problem with Aqara motion sensors 
Some stop recording motion event, the strange thing is that Luminance works. After restarting Homey they work for a few hours, but then not again. For a long time everything worked fine, but now itās annoying. The side button doesnāt help, restarting only solves the problem for a whileā¦ Anyone have a similar experience, or better yet a solution? Thanks a lot!
Hi,
Great app Ted! Really appreciate your work!!
IĀ“m having problems pairing Aqara Smart Plug EU to the new Homey Bridge and trying to find info if this is expected to work or not?
I have reported my issue here:
Thanks!
MiBoxer is a completely other company than Aqara and Xiaomi and has nothing to do with this thread.
It is a know isseu
After trying to get over this issue I changed to an extra zigbee network with Deconz on a Rpi. Moved all the sensors from Aqara and connected this netwerk truoght the Deconz app to Homey no it all works instantly without delay. It is not an app fault but a isseu within homey-zigbee-core I think.
Deconz works great but even with deconz every now and then I have a sensor which doesnāt respond anymore. Removing and adding to the network is the only option. A lot less problems but itās not like thereās no problems at all. Fortunately it is a hobby for me and no life threatening.
Ok noted. If i have a sensor dropping iāll post this here immediate.
In my case, the only reason for sensors being dropped from the network is if their battery is (about to run) empty. Sometimes I need to re-pair the sensor again after swapping the battery, but deCONZ/Phoscon is smart and will re-use the same device id so nothing gets broken.
My sensors are dropping also had no problems with them in 2 years time now 2 sensors wonāt update.
So how do i repair them in homey and will I lose insight data ?
